How to change the color of LED strips?（betaflight）

1. Please power on the FC, the LED light is on.

When the orange light is on, it indicates that it has entered Bluetooth control mode.

By short pressing the BOOT key for 1 second, you can switch to different preset LED colors.

2, You can also change the color of the LED strip in BF mode.

Please press and hold the BOOT button for 3 seconds to enter BF mode.

The orange light is off, indicating that it is in BF mode.

You need to set its color on the Betaflight ground station, the steps are as follows:

A. Turn on the LED strip button in the configuration tab, as shown in the figure below:

B. Please click the LED strip button to enter the LED strip tap, and then click the Wire ordering mode to enter the editing mode.

As shown below:

C. Please select the extra 4 LED lights, change their color, and finally click save, as shown in the figure below：