Flashing 32-bit ESCs requires the use of BLHeli_32 software (note that BLHeli_Suite cannot be used).
Download link:
https://github.com/bitdump/BLHeli/releases
1. Connect to BLHeli.
Please refer to this article:
How to connect 32bit ESC to BLHeli_32.
2. Flash ESC firmware:
(1)Select Flash BLHeli
(2)Flash the firmware according to the prompts (other settings can default).
(3)After flashing is completed, it will prompt to flash the next one until #1-#4 ESCs are flashed.
Comments
0 comments
Please sign in to leave a comment.