How to change motor direction for 32-bit BLHeli32 ESCs or 8-bit BLHeli-S ESC in the SpeedyBee app?

Make sure the ESC is well connected to the flight controller.

Important: REMOVE all the propellers before the following steps!

1. Plug in the battery to your quad so that your ESC can be powered up.

2. After connecting your ESC to the app, click "Motors"

3: Click the "Motor Direction"

4: Tap the motor(s) to spin or stop. Tap 'Change Direction' to change direction.

Please make sure the 4 motor's directions are the same as shown in the picture above.

If you enable the 'Motor direction is reserved' switch,  please make sure all the motor directions are correct.

If the motor directions are not correctly set, the quad will not take off normally. Learn more at What to do if my quad flip over when I try to take off?