Flex25 factory firmware
BetaFlight 4.3.1
Notes:
We only recommend pilots who adjust their PID themselves to use the following firmware and configuration. Currently, these 4.3.1 firmwares use the default PID of BF4.3.1. Compared with our 4.2.11 factory firmware, there will be some obvious jitters and prop washing. We're working on tuning the PID settings for Betaflight 4.3, and we will release it as soon as possible after the testing is completed. Sorry for the inconvenience.
|
Version |
VTX | Receiver(Protocol) | Firmware | Unified target Config |
| Flex25 HD TBS | DJI | TBS Crossfire Nano RX | Download | Download |
| Flex25 HD DJI SBUS | DJI | DJI HDL | Download | Download |
| Flex25 HD FrSky SBUS | DJI | FrSKY R-XSR | Download | Download |
| Flex25 Analog TBS | SpeedyBee TX800 | TBS Crossfire Nano RX | Download | Download |
| Flex25 Analog Frsky SBUS | SpeedyBee TX800 | FrSky R-XSR | Download |
BetaFlight 4.2.11
|
Version |
VTX | Receiver(Protocol) | Firmware | Unified target Config |
| Flex25 HD TBS | DJI | TBS Crossfire Nano RX | Download | Download |
| Flex25 HD DJI SBUS | DJI | DJI HDL | Download | Download |
| Flex25 HD FrSky SBUS | DJI | FrSKY R-XSR | Download | Download |
| Flex25 Analog TBS | SpeedyBee TX800 | TBS Crossfire Nano RX | Download | Download |
| Flex25 Analog Frsky SBUS | SpeedyBee TX800 | FrSky R-XSR | Download |
Comments
0 comments
Please sign in to leave a comment.